Fuel Door Release Actuator: Service and Repair

67 11 555 Removing And Installing/Replacing Servo Drive For Tank Filler Flap

Necessary preliminary tasks:
- Remove left rear light







Unlock catches (1) and remove cover (2).







Unfasten plug connection (1) and disconnect.
Release screw (2).
Slide servo drive for tank filler flap (3) upwards slightly and feed towards rear out of retaining plate.

Installation:
Make sure plastic retainer (4) is correctly seated in retaining plate.

Installation:
Carry out feed-in operation through rear light opening in rear side panel.






Insert servo drive for tank filler flap (1) with locking pin (2) into gaiter (3).

Replacement:







Unclip emergency actuator (1) in direction of arrow from servo drive for tank filler flap (2).