22 31 005 Removing and Installing/Replacing Transmission Support Bracket

22 31 005 Removing and installing/replacing transmission support bracket







Necessary preliminary work:
- Clamp off battery
- Remove intake silencer housing
- Remove control unit
- Support engine / transmission with car jack







Remove lid of fuse box.
Release screws (1).
Push fuse box to one side.
Tightening torque 61 13 1AZ.







Release screws (1).
Remove holder (2).







Release screws (1).

IMPORTANT: Screws M10 8.8 must be replaced by screws M10 10.9.

Tightening torque 22 32 2AZ.
Slacken nut (2).
Tightening torque 22 32 3AZ.
Remove transmission support bracket.