31 00 ... Front Axle + Steering: Wheel/Chassis Alignment Check Must Be Carried Out After the Following Work

31 00 ... Front axle + steering: Perform wheel alignment after the following repair work







Perform wheel alignment after the following repair work:
- Release the following screw connection:
- Steering box to front axle support
- Wheel control joint to wishbone
- Track rod end to track rod
- Support bearing on body (when centering is not available)

- Replacement of following parts:
1. Front axle support
2. Steering box
3. Gaiter (if the tie rod end has to be screwed off)
4. Swivel bearing
5. Wheel guide joint
6. Wishbone
7. Track rod end
8. Track rod