65 77 532 Removing and Installing/Replacing Front Left Sensor (Acceleration Sensor)

65 77 532 Removing and installing/replacing front left acceleration sensor (US version only)







Necessary preliminary work:
- Remove wheel arch cover at front







Disconnect plug connection (1).
Release screws (2) and remove acceleration sensor (3).

Installation note:
Replace screws (2).

Tightening torque 65 77 4AZ.







NOTE:
The installation position of the acceleration sensor has been changed on vehicles built after 08/2010:
(1) Installation position before 08/2010
(3) Installation position after 08/2010
The acceleration sensor (3) is positioned slightly offset on the other side of support (2).