ISTA/P(R) - Loading/Activation Of Enabling Codes
SI M09 01 11Programming/Coding Explanations
July 2011
Technical Service
SUBJECT
Loading/Activation of Enabling Codes with ISTA/P
MODEL
R56 (Cooper, Cooper S)
R55 (Cooper Clubman, Cooper S Clubman)
R57 (Cooper Convertible, Cooper S Convertible)
R60 (Cooper Countryman, Cooper S Countryman)
SITUATION
Enabling codes are needed for certain module replacements, retrofits, modules that fail programming, or during the QC 1 pre-delivery check. This bulletin gives an overview on how to load and activate enabling codes with ISTA/P.
CAUSE
The general purpose of the enabling codes is to unlock value-added functions or components in MINI vehicles.
INFORMATION
Please follow the procedures below to load and activate the enabling codes with ISTA/P. Refer to the attached document for detailed information and screenshots:
Refer to the M090111_Attachment below.
Refer to SI M09 02 11 to determine which enabling code is needed for which function/component.
For further information on enabling codes, please refer to the document "Information on Enabling Codes" in the Workshop Technology portal in Centernet.
PROCEDURE
Module Replacement Procedure
^ ISTA/P will ask you to import codes depending on the option codes and replaced module.
^ Download repair codes in ASAP.
Retrofit Procedure
^ ISTA/P will ask you to import codes depending on the retrofit.
^ Order the codes as mentioned in the installation instructions and in the EPC.
^ It can take up to 24 hours to generate codes.
^ Download the codes in ASAP.
Module Failed Programming Procedure
^ ISTA/P will ask you to import the codes, depending on which module failed programming.
^ Download the repair enabling codes in ASAP.
^ Try to import and activate in another ISTA/P session.
^ If those codes don't work, open a PuMA Case to receive technical support.
PDI with Navigation (SA 606) Procedure
^ During PDI, you will be asked in ISTA if you want to activate the Navigation Map.
^ Please refer to SI M65 03 10.
WARRANTY INFORMATION
This Service Information bulletin is intended to provide technical diagnostic and/or repair information.
ATTACHMENTS
M090111 Procedure