Windshield Moulding / Trim: Service and Repair
51 31 045 Removing And Installing/Replacing Trim On A-pillar, Left Or Right
Necessary preliminary tasks:
- Remove trim strip from side panel
Release door seal in A-pillar area.
Release screws (1).
Release trim (2) at clips (3) and remove.
Installation:
If necessary, replace faulty clips (3).
Trim (2) must not be damaged, replace if necessary.
Installation:
If necessary, release clips (2) from A-pillar (1).
Seal (3) must not be damaged.
Installation:
If necessary, replace faulty nut inserts (1) on A-pillar (2).
Removing and installing or replacing eject box