72 11 092 Removing and Installing/Replacing Rear Left or Right Seat Belts

72 11 092 - Removing and installing/replacing rear left or right seat belt





Necessary preliminary tasks:
- Remove rear seat Removing and Installing or Replacing Rear Seat
- Remove capping in luggage compartment on left or right





Installation:
- Microencapsulated screws (Loctite(R)) must be replaced and may not be reused
- Screw connection must be completed within 20 mins. (start of curing)
- Microencapsulated screws must not be retightened
- Clean thread of nut beforehand in event of repeated use





Release screw.
Tightening torque 72 11 07AZ [1][2]72 11 Seat Belts.

Installation:
Replace screw.





Release screw (1).
Tightening torque 72 11 05AZ [1][2]72 11 Seat Belts.

Installation:
Replace screw (1).

Remove inertia reel mechanism (2).

Installation:
Inertia reel mechanism (2) is coded against incorrect installation.