72 11 097 Removing and Installing/Replacing Rear Centre Lower Strap Fitting

72 11 097 - Removing and installing/replacing rear center lower belt fitting





Necessary preliminary tasks:
- Remove rear seat Removing and Installing or Replacing Rear Seat





Installation:
- Microencapsulated screws (Loctite(R)) must be replaced and may not be reused
- Screw connection must be completed within 20 mins. (start of curing)
- Microencapsulated screws must not be retightened
- Clean thread of nut beforehand in event of repeated use





Lift off cover.





Release screw.

Installation:
Replace screw.

Tightening torque 72 11 08AZ [1][2]72 11 Seat Belts.

Remove lower belt fitting.