Air Bag Control Module: Service and Repair

65 77 016 - Removing and installing airbag control unit





Warning!
Comply with airbag safety regulations [1][2][3]Safety Precautions and General Information.
Incorrect handling can activate airbag and cause injury.





Necessary preliminary tasks:
- Disconnect battery negative lead [1][2]12 00 ... Instructions For Disconnecting and Connecting Battery
- Remove center console 51 16 200 Removing and Installing Storage Compartment





Release nut (1) and disconnect ground cable (2).
Unscrew nuts (3).
Tightening torque 65 77 1AZ 65 77 Airbag Control Unit and Airbag Sensors.
Raise center console bracket (4) in direction of arrow and carefully feed out airbag control unit.





Disconnect plug connections (1) and remove airbag control unit (2).

Installation Note:
Make sure cables are correctly laid.