52 26 022 Removing And Installing Striker For Left Or Right Rear Seat Backrest

52 26 022 Removing And Installing Striker For Left Or Right Rear Seat Backrest

Necessary preliminary tasks:
- Move backrest back

Installation:
- Microencapsulated screws (Loctite) must be replaced and may not be reused
- Screw connection must be completed within 20 minutes(start of curing)
- Microencapsulated screws must not be retightened
- Clean thread of nut beforehand in event of repeated use







NOTE:
- Illustration shows removal of left side.
- The right side is removed in the same way as the left side.

Release screws (1).
Tightening torque: 52 26 4AZ

Installation:
Adjust striker.