33 31 011 Replacing Rear Axle Carrier

33 31 011 Replacing rear axle carrier

Note:
When replacing side member or cross-member:
Replace self-tapping screws for mounting rear axle carrier on
side member/cross-member.

Necessary preliminary tasks:
^ Remove rear axle carrier

Installation:
Use previous rear axle carrier as a template for modifying or
replacing small parts.





After installation:
^ Bleed braking system
^ Perform chassis alignment check Service and Repair

Important!
If the pedal support is removed or slips before the brake
lines are connected, it will be necessary to bleed the brake
system at front and rear!