65 83 590 Removing and Installing/Replacing Gyro Sensor Drive for Car Communication Computer

65 83 590 Removing And Installing/Replacing Gyro Sensor Drive For Car Communication Computer







IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection).







Necessary preliminary tasks:
- Remove Car Communication Computer







If necessary, cut through warranty seal.
Release screws (1).
Remove floor pan (2) towards bottom and set down.

IMPORTANT:
Contact spring strip (3) on floor pan (2) must not be bent: otherwise risk of short-circuiting.
When reinstalling floor pan (2), make sure individual springs of contact spring strip (3) are correctly seated.







Release screw (1).
Detach gyro sensor for Car Communication Computer (2) in direction of arrow from plug-in contact (3).