33 00 ... Rear Axle: Wheel/Chassis Alignment Check Must Be Carried Out After the Following Work

33 00 ... Rear axle: wheel/chassis alignment check must be carried out after the following work





A wheel/chassis alignment check must be carried out after the following work:

^ Release of following screw/bolt connections:
^ Trailing arm bracket to body
^ Upper control arm to rear axle carrier
^ Lower control arm to rear axle carrier / trailing arm

^ Replacement of following parts:
1. Rear axle carrier
2. Upper control arm
3. Lower control arm
4. Trailing arm / trailing arm bracket / rubber mount