Front Door Window Motor: Service and Repair

67 62 000 - Removing and installing / replacing flat motor for front left or right power window unit





Special tools required:
- 00 9 318 00 9 318 Multipurpose Wedge





Necessary preliminary tasks:
- Remove power window unit in front door Service and Repair





Release screw (1).

Remove flat motor from window lift rail (2).





Important!
Risk of damage!

Follow the work step set out below as closely as possible to avoid damaging the power window unit.





Important!
Guide wheel (3) must not be pulled out of mounting plate (4).

Power window unit must be replaced in this event!

Slacken screws (1) max. 5 mm (do not release fully!).

Slide in special tool 00 9 318 00 9 318 Multipurpose Wedge between flat motor (2) and mounting plate (4).





Press special tool 00 9 318 00 9 318 Multipurpose Wedge against deflection wheel (1) into mounting plate (3).

Unfasten screws.

Carefully lift flat motor (2) off mounting plate (3).