Replacing Right Hand Driveshaft Seal (6 Speed)

Replacing Right Hand Driveshaft Seal (6 Speed)
Special Tools Required:
^ 00 5 500
^ 23 4 002

Remove right hand driveshaft.

Remove lower stabilizer.





Use a screwdriver to lever out radial seal (1) from transmission housing.

Note: Care should be taken not to damage the transmission casing.





Install hint:
Using special tool 00 5 500 and special tool 23 4 002 fit seal into casing until the outer seal ring is flush with the transmission casing.

Check gearbox oil level and check for leaks.