Removing and Installing/Replacing Selector Shaft Radial Seal (AISIN)

24 12 110 - Removing and installing/replacing selector shaft radial seal (AISIN)





Special tools required:
- 24 4 280 24 4 280 Extractor
- 24 4 290 24 4 290 Drift





Necessary preliminary tasks:
- Remove gear position switch Service and Repair





Screw special tool 24 4 280 24 4 280 Extractor firmly into radial shaft seal.
Pull seal out of transmission case by means of bolt (1).





Installation:
Coat sealing lips of new radial seal with clean transmission oil.
Drive shaft seal firmly home with special tool 24 4 290 24 4 290 Drift.