Replacing Pressure Line for Power Steering

32 41 331 - Replacing pressure line for power steering





Necessary preliminary tasks:
- Draw hydraulic fluid out of tank - do not reuse

After completing tasks, bleed power steering Service and Repair





Recycling:
Comply with national waste disposal regulations.





Release screw (1) and disconnect line.

Installation:
Tightening torque, 32 41 3AZ Pump and Oil Supply.

Replace seal.

Seal off line and catch escaping hydraulic fluid in a suitable container.





Slacken nut (1).

Installation:
Tightening torque 32 41 13AZ Pump and Oil Supply





Release return line (1) so that pressure line (2) can be released and removed.

Installation:
Tightening torque 32 41 5AZ Pump and Oil Supply

Replace sealing rings.