Removing and Installing/Replacing Fixture for Steering Column Stalk

61 31 006 - Removing and installing (replacing) fixture for steering column stalk





Warning!
Move wheels into straight-ahead position and do not alter this position during the repair work.
With steering wheel removed, do not under any circumstances turn/twist fixture for steering column stalk!





Necessary preliminary tasks:
- Remove steering wheel Removing and Installing/Replacing Steering Wheel
- Remove lower section of steering column trim Removing and Installing/Replacing Lower Section of Steering Column Trim
- Remove top section of steering column casing Removing and Installing/Replacing Upper Section of Steering Column Trim.





Warning!
Secure volute spring cassette (1) against rotating with adhesive tape (2).
If unauthorized rotation of volute spring cassette (1) cannot be ruled out, it is essential to return volute spring cassette (1) to center position!
- Turn volute spring counterclockwise as far as it will go.
- Turn volute spring clockwise as far as it will go.
- Turn volute spring back to center position and secure so that centering pin (3) is at bottom position.





Unlock plug connections (2) and disconnect.
Release screws (1).
Remove fixture for steering column switch (3) in direction of arrow.





Replacement:
- Remove volute spring cassette Removing and Installing/Replacing Volute Spring Cassette
- Remove turn indicator/headlight dipping switch Removing and Installing/Replacing Turn Indicator/Headlight Dipping Switch
- Remove windscreen wiper switch Service and Repair