Removing and Installing/Replacing Left/Right B-Pillar Sensor

65 77 720 - Removing and installing/replacing left/right B-pillar sensor





Warning!
Comply with airbag safety regulations [1][2][3]Safety Precautions and General Information.
Incorrect handling can activate airbag and cause injury.





Necessary preliminary tasks:
- Disconnect battery negative lead Instructions for Disconnecting and Connecting Battery
- Remove rear side trim panel Removing and Installing Rear Left or Right Side Trim Panel





Release bolt (1).
Remove sensor (2) towards bottom and disconnect associated plug connection.
Tightening torque 65 77 3AZ 65 77 Airbag control unit and airbag sensors.

Installation Note:
Retaining lug (3) must not be damaged.
Make sure sensor (2) is securely seated.