Removing and Installing/Replacing Fan for Power Steering

32 41 070 - Removing and installing/replacing fan for power steering





Release nuts (1).

Installation:
Tightening torque 32 41 14AZ Pump and Oil Supply
Replace self-locking nuts





Unfasten plug connection (1).

Installation:
Disconnect plug connection before installing fan.





Vehicles built before 1st March 2002

Note:
Remove fuse box cover and check whether the diode is still in place. If the diode has already been removed do NOT continue with the following procedure:





Necessary preliminary tasks:
- Detach fuse box in interior.

Unwrap adhesive tape (1) from wiring loom to expose diode (4) and connectors (2 and 3).

Unplug connectors (2 and 3) from diode (4).
Remove and discard diode (4).
Reconnect connectors (2 and 3) and rewrap adhesive tape about wiring loom.