Service Interval Indicator

Resetting the Service Interval Indicator









The Oil Service and Inspection Service can be reset using the trip odometer reset button in the instrument cluster





- The ignition key must be in the "0" ("off") position. Hood, trunk and doors must be closed.
- Press and hold the trip odometer reset button in the instrument cluster, and turn the ignition key to position "1".






- Keep the button pressed for approx. 5 more seconds until the current SIA status appears in the display: "Oil Service" or "Inspection". Release the button.






- Press the button again and hold for approx. 5 seconds to change to the reset mode. The letters "RST" appear. While the display is flashing, press the button briefly to reset the Service Interval. The new interval will be displayed for 5 seconds.






- Release the button and turn ignition off.

Note: The Service Indicator can not be reset until 20% of the expected fuel is consumed following the previous reset.