Removing and Installing Left or Right Front Seat (Normal/Manual)

52 13 000 - Removing and installing driver's or front passenger seat (normal / manual)





Warning!
Observe safety regulations for handling airbag modules and pyrotechnical seat belt tensioners.

Incorrect handling may trigger off pyrotechnical belt tensioners or the side airbag, which may result in injury.

Necessary preliminary tasks:
- Switch off ignition

- Disconnect battery Instructions for Disconnecting and Connecting Battery





Tilt front seat and slide forward as far as it will go.
Release and DISPOSE OF screws (1) at back end.
Tightening torque 52 13 1AZ Front Seats.
Slide front seat back as far as it will go.





Release and DISPOSE OF screws (1) at front end.
Tightening torque 52 13 1AZ Front Seats.
Unlock and disconnect plug connections under front seat.





Important!
Cover entrance for protection purposes (risk of damage).
Lift out front seat.

Installation Note:
Carpet must not get between seat rails and floor pan near screw-fastening points (grating noises).