Removing and Installing/Replacing Front Left or Right Seal

54 34 337 - Removing and installing/replacing front left or right seal





Necessary preliminary tasks:
- Remove panel on guide rail Removing and Installing/Replacing Left or Right Guide Rail Panel





Unfasten screws.

Installation:
Replace screws and insert with Loctite.

Remove front seal (1).





Carry out function check:
Align front seal to A-pillar seal and roof frame seal.
Side window must run into seal correctly and rest in seal over entire width.
Build date up to 10/05:
If necessary, adjust seal by way of hexagon nuts (1).





Installation:
Seal (1) must rest cleanly in pocket of cowl panel seal (2).
Pocket (2) must not be crushed.