Removing and Installing / Replacing Convertible Top Tension Bar Bearings

54 34 378 - Removing and installing / replacing convertible top tension bar bearings





Necessary preliminary tasks:
- Remove luggage compartment wheel arch trim





Before removing tension bar bearing, mark position of bearing in relation to body.

Installation:
When installing, align bearing to markings.





Release screw (1).

Installation:
Insert screw (1) with Loctite.





Unscrew nuts.
Tightening torque 54 34 4AZ 54 34 Motor-Driven Convertible Top (Electrical Components).

Installation:
Check gap dimensions .
If necessary, adjust spacing for convertible top longitudinal and vertical alignment Adjusting Convertible Top.