Wheel Cover: Service and Repair

Replacing Wheel Cover On One Wheel
Replacing wheel cover:





Steel wheels:
Insert the plastic end of the wheel brace (1) between the wheel cover and the wheel, lever the cover to remove (it may be necessary to move the lever to several positions around the wheel to effect removal).





To refit the wheel cover locate the two clips (1) over the tire valve and push the cover to locate flush with the wheel around the whole of its circumference. Check again that valve sits correctly in the cover as shown (2).





Aluminum wheel covers:
To remove, insert tool from tool kit (1) into one of the holes in the circumference of the cover and pull to remove cover.





To refit locate clips (1) either side of the location (2) in the center of the wheel.





Push the cover until it fits flush with the aluminum wheel around the whole of its circumference.