Transmission Mount: Service and Repair

22 31 005 - Removing and installing/replacing transmission support bracket





Necessary preliminary tasks:
- Remove air cleaner housing.
- Remove battery compartment Removing and Installing/Replacing Battery Container (W10 only).





Release screws (1).
Push fuse box to one side.
Tightening torque, 61 13 1AZ.





Secure engine in installation position Removal and Replacement.





Release screw (1).
Tightening torque, 22 32 3AZ .
Release screws (2).
Tightening torque 22 32 2AZ .
Remove transmission support bracket.