Checking Front and Rear Wheel for Face and Radial Runout

36 10 209 - Checking front and rear wheel for face and radial runout





Special tools required:
- 36 1 030 36 1 030 Tester





Necessary preliminary tasks:
- Check wheel bearings





Lift vehicle.
Check wheel with special tool 36 1 030 36 1 030 Tester (measuring fixture) for lateral runout Technical Data.





Check wheel with special tool 36 1 030 36 1 030 Tester (measuring fixture) for radial runout Technical Data.





If applicable, remove balance weights.
Check lateral runout Technical Data of rim with special tool 36 1 030 36 1 030 Tester (measuring fixture).





Check radial runout Technical Data of rim with special tool 36 1 030 36 1 030 Tester (measuring fixture).