Removing and Installing/Replacing Fan Cowl

Removing and installing/replacing fan cowl

Necessary preliminary tasks:
Remove fan cowl with electric fan.

Importamt
Make sure without fail that coolant hoses are correctly routed, risk of damage by sharp edges or abrasion





Note:
Nut (1) for fan blade has left-hand thread

Unscrew nut (1).
Fan blade to motor retaining nut 6 Nm






Undo screws (1) for fan motor and screws (2) for resistor block.
Remove fan motor, series resistor block and fan shroud.

Installation
Fit wiring loom correctly

If fitted, do not remove metal tabs (balance weight) on fan wheel (imbalance)