Removing and Installing/Replacing Airbag Module on Passenger Side

72 12 000 - Removing and installing / replacing airbag module on passenger side





Warning!
Read and comply with safety regulations for handling airbag modules and pyrotechnical belt tensioners.
Incorrect handling can activate airbag and cause injury.
The airbag cover on the passenger side must be replaced each time the airbag is triggered!





Necessary preliminary tasks:

Up to 07/04:
- Remove airbag cover on passenger side.

From 07/04:
- Remove instrument panel upper section trim. Please refer to: Vehicle/ Body and Frame/ Dashboard/Instrument Panel/ Service and Repair Service and Repair

Up to 07/04:




Release screws (1).

Tightening torque 72 12 1AZ .

Disconnect plug connection 72 12 Unlocking/ Locking Airbag Plug Connections and remove passenger airbag in direction of arrow.

From 07/04:




Disconnect cable straps.

Unlock plug connection (1) 72 12 Unlocking/ Locking Airbag Plug Connections and disconnect.

NOTE:
Airbag module (2) is removed with ignition cable and bracket.







Release screws (1).


Installation Note:
Restraint cables (2) must run between bracket (3).





Disconnect cable straps.

Unlock plug connection and disconnect. 72 12 Unlocking/ Locking Airbag Plug Connections

Note:
Airbag module (2) is removed with ignition cable and bracket.





Release screws (1).

Tightening torque 72 12 1AZ .

Lift out airbag module.