Removing and Installing/Replacing Trim For Lower Rear Lid

51 49 005 Removing And Installing/Replacing Trim For Lower Rear Lid

Necessary preliminary tasks:
COOPER S JCW GP only:
- Remove brake light trim panel







Release screws (1).
Release trim for rear lid from clips (2) and remove.

Installation: If necessary, detach clips (2) from rear lid and attach to trim for rear lid.

If necessary, replace defective clips.
Secure clips (2) with body adhesive tape to trim for rear lid so that they cannot move during fitting.







Replacement:
Remove stops for rear parcel shelf.