51 24 080 Removing and Installing/Replacing Drive For Rear Lid Lock

51 24 080 - Removing and installing/replacing drive for rear lid lock





Necessary preliminary tasks:
- Partially remove panel for rear lid .
- Partially remove retractor 51 24 070 Removing and Installing/Replacing Retractor.





Turn drive for rear lid lock in upwards direction.
Unscrew nut (1).
Feed out anti-theft protection cover (2) upwards from guide (3).





Unclip clips (2) and guides of Bowden cables (3) towards bottom.
Detach plug connection (4) from servodrive (5).
Remove drive for rear lid lock (1).
Replacement:
If necessary, remove servodrive for rear lid locking (5) 67 11 560 Replacing Servodrive for Rear Lid Lock.