Clutch Slave Cylinder: Service and Repair

Removing And Installing Or Replacing Clutch Operating Cylinder (COOPER S)

Note: After completion of work, bleed clutch hydraulics.

Remove underbody protection.





Remove clutch slave cylinder retaining bolts (1) and release clutch slave cylinder (2). Remove retaining clip (3) and disconnect pipe (4).
Slave cylinder to bracket
M8 24 Nm





Note: When slave cylinder has been removed, check sealing ring is attached to pipe retainer. Ensure audible click when refitting pipe retainer into slave cylinder.

Refit retaining clip.

Bleed clutch.