Instrument Panel Cluster (IPC) Lens

Instrument Panel Cluster (IPC) Lens

Removal and Installation

NOTE: Non-Hybrid shown, Hybrid similar.











All vehicles

1. Remove the Instrument Panel Cluster (IPC). For additional information, refer to Instrument Panel Cluster (IPC) Instrument Panel Cluster (IPC).

Fusion and Milan

NOTICE: Make sure the screw(s) are securely tightened, but do not over-tighten to prevent stripping the screw out.

NOTE: While the IPC lens is removed, the IPC must remain with the gauges facing upward to maintain gauge calibration.

2. Remove the screw (non-hybrid) or the 4 screws (hybrid).

3. Release the 6 tabs (non-hybrid) or 8 tabs (hybrid) and remove the lens and mask assembly.

MKZ

4. Release the 8 tabs and remove the lens.

All vehicles

5. To install, reverse the removal procedure.