Oil Pump Screen and Pickup Tube

Oil Pump Screen and Pickup Tube

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the oil pan. For additional information, refer to Engine Lubrication Components - Exploded View Service and Repair and Oil Pan Oil Pan.

3. NOTE: Discard the gasket and clean and inspect the gasket mating surfaces.

Remove the 2 bolts and the oil pump screen and pickup tube.

- To install, tighten to 10 Nm (89 lb-in).

4. To install, reverse the removal procedure.