Engine Controls - Wrench Lamp ON/DTC P0A7C Is Set
TSB 11-7-3107/28/11
HYBRID ONLY - WRENCH LIGHT WITH DTC POA7C -
BUILT ON OR BEFORE 9/09/2010
FORD:
2010-2011 Fusion
LINCOLN:
2011 MKZ
MERCURY:
2010-2011 Milan
This article supersedes TSB 10-21-10 to update the Part List and Service procedure.
ISSUE
Some 2010-2011 Fusion Hybrid, Milan Hybrid and 2011 MKZ Hybrid vehicles built on or before 9/09/2010 may exhibit a wrench light on with no driveability concerns and diagnostic trouble code (DTC) POA7C (motor electronics over temperature) stored in the powertrain control module (PCM).
ACTION
Reprogram the PCM to the latest calibration using IDS release 74.01 and higher. This new calibration is not included in the VCM 2011.7 DVD. Calibration files may also be obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION DESCRIPTION TIME
110731A 2010-2011 Fusion Hybrid, 0.3 Hr.
Milan Hybrid 2011 MKZ
Hybrid: Check DTCs And
Reprogram The PCM (Do
Not Use With Any Other
Labor Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
RECAL 04
Disclaimer