P060D

NOTE: Refer to the applicable diagnostic/repair information to diagnose the body and chassis DTCs.

NOTE: An X equals any number 0 through 9 or the letter A through F.

NOTE 1: Install a new transaxle.

NOTE 2: Clear the transaxle control module (TCM) continuous DTCs. Carry out a TCM key ON engine OFF (KOEO) on demand self-test. If DTC POA90 is present again, install a new transaxle. If the DTC is not present, concern can not be duplicated or identified at this time. Go to PPT Z in Pinpoint Tests for intermittent diagnostics. Test Z: Intermittent

NOTE 3: Check for damaged or seized engine. If the engine is OK, install a new transaxle.

NOTE 4: Clear the transaxle control module (TCM) continuous DTCs. Carry out a TCM key ON engine OFF (KOEO) on demand self-test. If DTC POA92 is present again, check for damaged or seized engine, and install a new transaxle. If the DTC is not present, concern can not be duplicated or identified at this time. Go to PPT Z in Pinpoint Tests for intermittent diagnostics. Test Z: Intermittent

NOTE 5: DTC P1000 is ignored in the key on, engine off (KOEO) and key on, engine running (KOER) self-tests. Disregard DTC P1000 and continue as directed.