Inertia Fuel Shutoff Switch: Service and Repair

Inertia Fuel Shutoff (IFS) Switch









Removal and Installation

1. Remove the LH trunk carpet trim.

2. Disconnect the Inertia Fuel Shutoff (IFS) switch electrical connector.

3. NOTICE: Do not overtighten the fasteners or damage to the switch will occur.

Remove the 2 bolts and the IFS switch.

- To install, tighten to 12 Nm (106 lb-in).

4. NOTE: If necessary, reset the IFS switch after installation has been completed.

To install, reverse the removal procedure.