Exhaust Intermediate Pipe

Exhaust Intermediate Pipe

Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Remove and discard the 2-exhaust Y-pipe flange nuts.
- Discard the gasket.

- To install, tighten to 40 Nm (30 lb-ft).

3. Loosen the Torca(R) clamp nut.
- To install, tighten to 55 Nm (41 lb-ft).

4. Separate the exhaust intermediate pipe from the muffler and tailpipe and remove the exhaust intermediate pipe.

5. To install, reverse the removal procedure.
- Always install new gaskets and exhaust fasteners.

6. Start the engine and check for exhaust leaks.