Oil Pump Screen and Pickup Tube - Installation

Oil Pump Screen and Pickup Tube

NOTICE: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces that enters the oil passages, coolant passages or the oil pan, can cause engine failure.

Late build engines

1. Using a new O-ring seal, install the oil pump screen and pickup tube and the 2 bolts.
- Tighten to 10 Nm (89 lb-in).





Early build engines

2. Using a new O-ring seal, install the oil pump screen and pickup tube and the 3 bolts.
- Tighten to 10 Nm (89 lb-in).





All engines

3. Install the oil pan. For additional information, refer to Oil Pan Oil Pan - Installation.