Door Glass Top Run - Front

Door Glass Top Run - Front

Removal and Installation

NOTE: For MKZ only, the front window motor must be de-initialized, then initialized whenever the front window motor is removed from the window regulator drum housing, a new window regulator is installed, a new window glass is installed, a new top run is installed or for any operation in which grease or lubricants are applied to the window regulator or glass run.

1. Remove the front door window glass. For additional information, refer to Window Glass - Front Door Window Glass - Front Door.

2. Remove the front door window glass inner weatherstrip.





3. Remove the front door glass top run.





4. To install, reverse the removal procedure.