Selector Lever Knob

Selector Lever Knob - 2.3L, 3.0L









Removal

1. Slide the lower selector lever knob bezel downward.





2. Remove and discard the 2 screws and lift up on the selector lever knob to remove.





Installation

1. NOTICE: Do not overtighten the selector lever knob bolts or damage to the selector lever or knob may occur.

Install the selector lever knob and 2 new screws.

- Tighten to 2 Nm (18 lb-in).





2. Slide the lower selector lever knob bezel up and snap it into place.