Crankshaft Rear Seal

Crankshaft Rear Seal









Removal

1. With the vehicle in NEUTRAL, position it on a hoist.

2. Remove the flexplate. For additional information, refer to Flexplate [1][2]Flexplate.

3. Using the Slide Hammer and the Crankshaft Rear Seal Remover, remove and discard the crankshaft rear oil seal.





Installation

1. NOTE: Clean all sealing surfaces with metal surface cleaner.

NOTE: Apply clean engine oil to the seal lip and seal bore before installing the seal.

Using the Crankshaft Rear Main Oil Seal Installer and the Crankshaft Rear Main Oil Seal Installer Bolts, install the crankshaft rear oil seal.





2. Install the flexplate. For additional information, refer to Flexplate [1][2]Flexplate.