Air Cleaner Outlet Pipe

Air Cleaner Outlet Pipe

Removal and Installation

All vehicles

1. Disconnect the crankcase vent tube and vacuum tube from the ACL outlet pipe.

Partial Zero Emissions Vehicle (PZEV)

2. Disconnect the Secondary Air Injection (AIR) hose from the ACL outlet pipe.

All vehicles

3. Loosen the ACL outlet pipe-to-ACL.
- To install, tighten to 3 Nm (27 lb-in).

4. Loosen the ACL outlet pipe-to-Throttle Body (TB) clamp.
- Remove the ACL outlet pipe.

- To install, tighten to 5 Nm (44 lb-in).

5. NOTE: The ACL outlet pipe should be securely sealed to prevent unmetered air from entering the engine.

To install, reverse the removal procedure.