Pinpoint Test G: Solenoid Mechanical Failure

4R70E/4R75E

Pinpoint Tests

PINPOINT TEST G: SOLENOID MECHANICAL FAILURE

NOTE: Repair all other DTCs before repairing the following DTCs: P1714, P1715 and P1740.

-------------------------------------------------
G1 ELECTRONIC DIAGNOSIS


- Connect the scan tool.
- Carry out Key ON Engine OFF (KOEO) Test.
- Are only DTCs P1714, P1715 and P1740 present?

Yes
INSTALL a new solenoid and/or body. REFER to the Diagnostic Trouble Code (DTC) Charts Diagnostic Trouble Code (DTC) Charts for code description. GO to G2 .

No
REPAIR the other DTCs first. CLEAR the DTCs. CARRY OUT Transmission Drive Cycle Test. TEST the system for normal operation. [1][2]Component Tests and General Diagnostics

-------------------------------------------------
G2 TRANSMISSION DRIVE CYCLE TEST


- Carry out Transmission Drive Cycle Test. [1][2]Component Tests and General Diagnostics
- Retrieve DTCs.
- Does the vehicle upshift and downshift OK?

Yes
GO to G3.

No
REFER to Diagnosis By Symptom Diagnosis By Symptom to diagnose shift concerns.

-------------------------------------------------
G3 RETRIEVE the DTCs


- Connect the scan tool.
- Carry out Key ON Engine OFF (KOEO) Test until continuous DTCs are displayed.
- Are DTCs P1714, P1715 and P1740 still present?

Yes
REPLACE the PCM. ROAD TEST the vehicle and REPEAT the Self Test.

No
Testing completed. If a concern still exists, REFER to Diagnosis By Symptom Diagnosis By Symptom.

-------------------------------------------------