Automatic Transmission Dipstick - Dipstick Tube: Service and Repair

4R70E/4R75E

Transmission Filler Tube









Removal and Installation

1. WARNING: Before servicing a vehicle equipped with a fire suppression system, depower the system by following the procedure in Fire Suppression System. Failure to follow the instructions may result in serious personal injury Procedures.
With the vehicle in NEUTRAL, position it on a hoist.

2. Remove the bolt.





3. Remove the fluid filler tube.





4. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and procedures, refer to Fire Suppression System. Failure to follow these instructions may result in serious personal injury Procedures.
To install, reverse the removal procedure. If equipped with a fire suppression system, repower the system.
- Tighten to 48 Nm (35 lb-ft).