Front Door Window Glass Weatherstrip: Service and Repair

DOOR GLASS TOP RUN - FRONT

Exploded View







Removal and Installation

NOTE:
- If installing a new LH front door glass top run, the LH front window motor must be initialized.
- The LH front window motor must be de-initialized, then initialized whenever the LH front window motor is removed from the window regulator drum housing, a new window regulator is installed, a new window glass is installed, a new top run is installed or for any operation in which grease or lubricants are applied to the window regulator or glass run.

1. Remove the front door window glass.
2. Remove the front door window glass inner weatherstrip.







3. Remove the door glass track bolt.
- To install, tighten to 8 Nm (71 lb-in).







4. Remove the front door glass top run.







5. To install, reverse the removal procedure.
- If installing a new LH front top run, the LH front window motor must be initialized. For additional information, refer to Window Motor Initialization. Testing and Inspection