Fuel Level Sender

FUEL LEVEL SENDER

Fuel Pump (FP) Module Mounted Sender:

Fuel Level Sensor Assembly Mounted Sender:

Removal and Installation

WARNING:
- Do not smoke, carry lighted tobacco or have an open flame of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.
- Do not carry personal electronic devices such as cell phones, pagers or audio equipment of any type when working on or near any fuel-related component. Highly flammable mixtures are always present and may be ignited. Failure to follow these instructions may result in serious personal injury.

1. Remove either the fuel pump (FP) module or fuel level sensor assembly.
2. Disconnect the fuel level sender electrical connector.
3. Depress the lock tab and slide the fuel level sender upwards and remove.







4. To install, reverse the removal procedure.