Cruise Control Switch: Service and Repair

SPEED CONTROL SWITCH

Wagon:

Sedan:

Removal and Installation

Wagon
1. Remove the 2 screws and the steering wheel controls bezel.
2. Remove the 2 screws and the speed control switch.
- Disconnect the electrical connector.
- To install, tighten to 7 Nm (62 lb-in).

Sedan
3. Remove the driver air bag module.
4. Remove the 2 screws and the speed control switch.
- Disconnect the electrical connector.
- To install, tighten to 7 Nm (62 lb-in).

All vehicles
5. To install, reverse the removal procedure.