Rear Door Panel: Service and Repair

DOOR TRIM PANEL - REAR







Removal and Installation
1. Remove the rear door handle bezel screw cover.
2. Remove the rear door handle bezel screw.
3. Remove the rear door handle bezel.
4. Remove the rear door handle trim cover screw.
5. Remove the 6 rear door trim panel screws.

6. CAUTION: Avoid pulling directly on the upper rear corner (vinyl portion) of the door trim panel during removal to prevent damage to the door trim panel.

Remove the rear door trim panel.
- Pull the rear door trim outward to release the retaining clips.
- If equipped, disconnect the electrical connectors.

7. To install, reverse the removal procedure.