Keyless Entry Key-Pad: Testing and Inspection

KEYLESS ENTRY KEYPAD CODE PROGRAMMING

Programming A Personal Entry Code And Keypad Association To Memory Seats And Mirrors (if Equipped)

NOTE: The system allows 3 personal codes to be programmed.

1. Enter the factory set 5-digit keyless entry keypad code.
2. Within 5 seconds, press the 1/2 button on the keypad to activate the programming mode.
3. Enter the new 5-digit keyless entry keypad code. Each number must be entered within 5 seconds of each other.

4. NOTE: The factory-set code cannot be associated with a memory setting.

To associate the entry code with a new memory setting, enter a sixth digit to indicate which driver should be set in a memory recalled by the personal entry code:
- Pressing 1/2 recalls Driver 1 settings.
- Pressing 3/4 recalls Driver 2 settings.
- Pressing other keypad buttons or not pressing a keypad button as a sixth digit does not set a driver and will not recall a memory setting.

5. The door locks will lock and unlock to confirm the new code is programmed.

Erasing a Personal Entry Code
1. Enter the factory set 5-digit keyless entry keypad code.
2. Within 5 seconds, press the 1/2 button on the keypad and release.
3. Within 5 seconds, press and hold the 1/2 button for 2 seconds.
4. All personal codes are now erased and only the factory set 5-digit code will work.